I need a GPR

Discussions focused on other caves ...

I need a GPR

Post Number:#1  Postby tr45l » Sat Mar 22, 2003 7:16 am

We know the exact location of a cave,which has 10 tones of gold,but due to war the entrance of the cave was destroyed.Because of that, we need a GPR that has depth range 35m.Where can i find one and how much does it cost?



If anybody with a GPR wants to take part in our excavation, e-mail me at omonymos@hotmail.com
User avatar
tr45l
 
Posts: 3
Joined: Fri Mar 21, 2003 6:00 pm

I need a GPR

Post Number:#2  Postby Unregistered User » Sat Mar 29, 2003 6:04 pm

The cost of a QUALITY GPR is about 15k U.S.dollars.
I am in the same problem solving delimena as you. All I can offer is the promise to give you my GPS unit after I locate the cache we are after.We havent bought one yet.In your case ,It would be cheaper to file a mining claim.Go for tailing recovery.Set up 3 men for 3 weeks digging. Thats about $4k and will allow you positive action on your areas of intrest. I am in the same position.....Electronics wont help us,unless they detect a lode.We may only need to dig another 9 or 248 feet!
User avatar
Unregistered User
 
Posts: 12234
Joined: Mon Feb 11, 2002 9:11 pm

I need a GPR

Post Number:#3  Postby Roger Snow » Sat Mar 29, 2003 7:13 pm

WHERE ? I CHECK IT FOR YOU, I DIG IT FOR YOU, I WHIFF ON IT FOR YOU, I CARRY THE TEN TONS OUT FOR YOU, I HELP YOU SPEND IT FOR YOU, I SLEEP ON IT AND GAURD IT FOR YOU, I READ IT BEDTIME STORIES FOR YOU, I CHANGE IT'S TEN TON DIETY FOR YOU, I EVEN BE IT'S GODFATHER FOR YOU, I GO TO MASS FOR IT FOR YOU, I BE SPECIAL TO IT FOR YOU, I LET IT SLEEP AT MY HOUSE FOR YOU, I KEEP THE CHANGE FOR YOU, I WASH IT'S DISHES FOR YOU, I POLISH IT FOR YOU, I TRIM IT'S FINGER NAILS FOR YOU, I SEW NEW CLOTHES FOR IT FOR YOU,
JUST TELL ME WHERE IT'S TEN TON SELF IS AT WILL YA'
AND I'LL EVEN GO GET IT AND SHARE IT WITH YOU FOR YOU. (WINK)
Rog'
User avatar
Roger Snow
 
Posts: 879
Joined: Mon Feb 11, 2002 9:11 pm

I need a GPR

Post Number:#4  Postby Unregistered User » Sun Mar 30, 2003 3:05 am

www.earthviewtechgpr.com

He has a really good gpr, around eightythousand dollar
machine.

littlehsqaw@hotmail.com
User avatar
Unregistered User
 
Posts: 12234
Joined: Mon Feb 11, 2002 9:11 pm

I need a GPR

Post Number:#5  Postby Unregistered User » Sun Mar 30, 2003 3:24 am

yes
Marc is the Best when yer talkin GPR...

www.earthviewtechgpr.com
User avatar
Unregistered User
 
Posts: 12234
Joined: Mon Feb 11, 2002 9:11 pm

I need a GPR

Post Number:#6  Postby 10x » Sun Mar 30, 2003 10:45 am

Well lets see a simple ground radar unit can be made with a good storage scope, a transmiter set for single pulse and of course a small generatior to run the stuff with. It is such that iit can be farly efective to 50 to 60 foot, depending on the out put you desirier. Not get a good digital scope in the higher freq., used will still run a good 5 to 7 grand...
User avatar
10x
 
Posts: 322
Joined: Sun Mar 16, 2003 6:00 pm

I need a GPR

Post Number:#7  Postby Unregistered User » Sun Mar 30, 2003 3:24 pm

yes but,,,
you need someone that can read the data too,,,

might as well use the best...
User avatar
Unregistered User
 
Posts: 12234
Joined: Mon Feb 11, 2002 9:11 pm

I need a GPR

Post Number:#8  Postby 10x » Mon Mar 31, 2003 5:31 am

"yes but,,,
you need someone that can read the data too,,,"

Well in my area you better get one you can get the original signal with also. Computer interpitation is usualy wrong here.
User avatar
10x
 
Posts: 322
Joined: Sun Mar 16, 2003 6:00 pm

I need a GPR

Post Number:#9  Postby tr45l » Mon Mar 31, 2003 7:14 am

First of all,thank you for your interest.But i would like to know which type of GPR are you going to buy or which do you suggest me to buy.One more question,which GPR can penetrate into sandstone.
User avatar
tr45l
 
Posts: 3
Joined: Fri Mar 21, 2003 6:00 pm

I need a GPR

Post Number:#10  Postby 10x » Mon Mar 31, 2003 12:21 pm

Is the sandstone the prevalent matirial, or is it such that it is boardered by other rock???
User avatar
10x
 
Posts: 322
Joined: Sun Mar 16, 2003 6:00 pm

I need a GPR

Post Number:#11  Postby Radarquesta » Mon Mar 31, 2003 3:44 pm

Tr45l,
Of the 3 systems you ask me about,The GSSI SIR 3000 with a 400 Mhz antena is the most versatiel. Dry sand stone is about the best ground you could have for a GPR survey. What ever the depth, the system is rated for "in normal ground", you can times that by 3 in solid rock. Be prepared to spend about three to six months of hands on with the system to get comfortable with it.
The 10A+4 channel 20 gb HDD has systems you wouldn't use looking for a cache or a void. HDD stands for Horizontal Directional Drill.
User avatar
Radarquesta
 
Posts: 19
Joined: Sun Jan 19, 2003 6:00 pm

I need a GPR

Post Number:#12  Postby 10x » Tue Apr 01, 2003 1:36 am

The bigest problem I have seen with any sestym is that the user will not set up a complet survay. They jump around. That is the bigest misuse of the system. Set up what ever system you use for a full cosing over survay. That way you will not miss the target.
User avatar
10x
 
Posts: 322
Joined: Sun Mar 16, 2003 6:00 pm

I need a GPR

Post Number:#13  Postby Radarquesta » Tue Apr 01, 2003 11:09 am

10x you are so right. If you are not going to do the survey right, then you might as will not do it at all. Most of the time you will not luck out and hit it on the first pass. More like the 100th pass or the last pass.....LOL It takes alot of WORK to do it right.
User avatar
Radarquesta
 
Posts: 19
Joined: Sun Jan 19, 2003 6:00 pm

I need a GPR

Post Number:#14  Postby Radarquesta » Tue Apr 01, 2003 11:16 am

tr45l, you said a war destoryed the cave, which war was that?Is the 10 tons of gold a spainish cache?
User avatar
Radarquesta
 
Posts: 19
Joined: Sun Jan 19, 2003 6:00 pm


Return to Caves, Other

  • Who is online

    Users browsing this forum: No registered users and 1 guest